BlueLight BL1000A - One Port 10Gigabit Ethernet Handheld Tester

BlueScope is an Ultra-compact, portable, easy-to-use Dual port 1G/10G Ethernet Tester/Analyzer with powerful and versatile features that enables users to perform demanding IP network tests and measurements. 100% Linux based. 1 year factory warranty. Made in USA.

Specifications

PORTS:

• 1 Optical 10GE SX/LX Ethernet port.
• 1 RJ45 10/100 Mbit/s Ethernet port.
• 1 USB (Universal Serial Bus).

DIMENSIONS:

• Size: 172.5 x 227 x 58.5 (mm)
• Weight: 1.3(kg) with battery.
• Battery - 0.3 (kg)

DISPLAY:

• 5.7 color TFT-LCD display screen

POWER:

• DC adaptor: 14 V to 21 V.
• Removable/Rechargeable lithium ion batteries.
• Battery life: 3 hour typical, 8 hour in standby mode

Key Functions

• Powerful built-in PACKET CAPTURE and analysis functions regarding all packets, filtered or event triggered option.
• Throughput testing, Generate multistream traffic up to 1Gbit/s line rate on copper and optical multi-ports, Ethernet frames, IP packets layer 1/2/3/4 with multiple modes such as continuous, ramping, burst mode.
• Cable BERT on copper port, BERT in Unframed mode on fiber optical port.
• Packet analysis such as FCS errors, L3/L4 checksum errors, Round Trip Delay (RTD), Packet Arrival Interval (PAI), packet loss, sequence errors.
• IP application test such as Ping, ARP, Trace Route, DNS, and DHCP.
• RFC2544: RFC2544 network benchmark testing supports throughput, latency, frame loss, and back-to-back frames without loss, all varying frame sizes defined in RFC 2544 standard on optical 1G/100FX and copper 10/100/1000 BASE-T.
• Packet statistics measurement such as utilization, VLAN, control frame and packets, uni/multi/broadcasts, fewer than 64 byte (runt) frame, jumbo frame with global and filtered.
• Cable diagnostics (TDR) such as cable fault, irregular impedance, cable length.
• Loopback testing at layer 2 (MAC) and layer 3 (IP).
• Configurable QoS such as CoS, TOS, and DSCP.
• Optical power measurement.
• Simplifies the troubleshooting of IPTV services at the residential gateway.
• File Manager: Copy test results, test log files, screen capture files, and configuration files into USB memory card.
• Ethernet and IP advanced connectivity testing such as ARP, Ping, Trace Route, DHCP, and DNS.

 BlueLight 1G/10G brochure